Leveling Operations‌

1.Reverse Gear Preference‌

• For grading tasks, prioritize reverse gear movement. When forward grading is necessary, maintain bucket rollback angle ≤20° for optimal material control.

2.Three-Step Grading Method‌

• Material Collection‌: Engage bucket at low RPM, then increase throttle gradually to prevent wheel spin

• Spreading‌: Keep teeth grounded, utilizing rear traction force for even distribution

• Fine Grading‌: Activate hydraulic float mode for precision surface finishing

Loading & Hauling Protocols‌

1.Transport Configuration‌

• Lower bucket to maintain 15-30cm ground clearance during transit for stability

2.Efficiency Cycle‌

Standard workflow includes:

• Material excavation

• Short-distance transport

• Targeted unloading

3.Route Management‌

• Maintain designated haul roads to reduce tire wear

• Maximum efficiency within 100m range; recommended speed limits:

• Paved surfaces: ≤25km/h

• Rough terrain: ≤15km/h

Safety Alerts‌

• Never lift loads while moving to prevent rollover accidents

• On soft ground, reduce tire pressure or use graded approach techniques